SIGNALWARE LOGOTI DSP LOGO

Analog Expansion Daughterboard

Signalware Product Summary

See SIGNALWARE's Home Page or Customer Reply Form for further assistance.

Analog Expansion Daughterboard Summary

The SIGNALWARE AED-xxx series of Analog Expansion Daughterboards for the Texas Instruments TMS320C5x/C6x Evaluation Module (EVM) or DSP Starter Kit (DSK) provide a flexible way to combine analog I/O with several different Digital Signal Processor (DSP) models. Texas Instruments produces several evaluation products that cover hardware prototyping and software development for a wide range of the DSP models in the TMS320C5x and TMS320C6x product lines. All but a few older products have the same Multi-Platform Daughterboard interface. All of Signalware daughterboards fit the Multi-Platform Daughtercard interface. Thus, the developer is able to choose a combination of DSP model and Signalware daughterboard that will provide a prototype for an embedded DSP based system. Texas Instruments provides documentation for this interface in SPRA711.

SIGNALWARE also supports the ORSYS Micro-line series of Texas Instrument Digital Signal Processors. This is accomplished with bus adaptors that convert the Micro-line bus into the Texas Instrument Multi-Platform Daughtercard Interface bus, the ORS90x Adaptors. These adaptors mount on the top of the Micro-line board stack and allow any of the daughterboards below to be mounted on the adaptor. While this configuration is convenient for rapidprotyping, Signalware provides a fully conformal, custom peripheral card configuration for production. Please fill out a customer reply form to receive further information on the Micro-line configurations.

Daughterboard
A/D
D/A
Max. Rate Samples/Sec
Data bits
Digital I/O
AED-100
2
2
Up to 80M*
8
4I, 4O
AED-101
2
2
80M
12
16
AED-102
3 x 11 Chan.
2 x 4 Chan.
200K
12
24
AED-103
2 x 8 Chan.
2
1.25M
10/12
24
AED-106
4 x 4 Chan.
None
6M
12
24
AED-109
2 x 2d/4s Chan.
2
8M
12
16
AED-150
0-4*
0-4*
50M
12-16*
None
AED-200
1-11*
1-8*
20K - 30M*
10-16*
24
AED-21x
0-3*
0-3*
Up to 30M*
10
24
AED-22x
0-3*
0-3*
Up to 30M*
12
24
AED-300
1-20*
1-20*
20K - 30M*
12-24*
16
AED-30x
1-4 Stereo CODEC
Up to 192K*
16-24*
16
AED-32x
0-4*
0-12*
Up to 52M*
12
16
AED-35x
0-6*
0-10*
Up to 500K*
16
16
AED-38x
1-6*
0-4*
Up to 20K
24
16
AED-400
0-24**
0-12**
Up to 40M**
12-20**
0, 16 or 20

* Depends on A/D, D/A or CODEC selected.

** Depends on the Signal Strip Unit(s) (SSU) selected. SSUs with more capabilities are planned to be introduced so this data is subject to upgrade without notice.

Accessories for the Daughterboards are available direct from Signalware. Accessories include, cables, stacking adaptors, prototyping boards, Xilinx FPGA configuration software and cables.

For information on various combinations of TMS320C5x/C6x EVM and DSK products with the Signalware daughter cards listed above, see our Prototype Configuration Table.

See SIGNALWARE's Home Page or Customer Reply Form for further assistance.